Fabrication of porous titania sheet via tape casting: Microstructure and water permeability study

In this article, we report the effects of slurry formulation and sintering conditions on the microstructure and permeability of porous titania sheets prepared by tape casting. It was found that solid concentration and binder content in the titania slurry play a vital role in the porosity and microstructure of the sintered titania sheets. Solid concentration and binder content were optimized based on the green tape quality and open porosity of the sintered titania sheets. The optimum solid concentration with the lowest surface roughness was obtained at 0.61 g/cm³. The effects of temperature and sintering time on the open porosity and crystal structure of the final product were also investigated. Increasing the sintering temperature from 1000 to 1100 °C resulted in increasing the pore size from 170 to 264 nm and decreasing the open porosity. Finally, water permeability of the porous titania sheets was studied to evaluate the permeation flux and maximum operating pressure. The results revealed that the permeability of the porous titania sheet is increased not only by increasing the open porosity but also by increasing the pore size.     

ZnIn2S4/In(OH)3 hollow microspheres fabricated by one-step l-cysteine-mediated hydrothermal growth for enhanced hydrogen production and MB degradation

An intervening barrier for photocatalytic water decomposition and pollutant degradation is the frustratingly quick recombination of e⁻ - h⁺ pairs. Delicate design of heterojunction photocatalysts by coupling the semiconductors at nanoscale with well-matched geometrical and electronic alignments is an effective strategy to ameliorate the charge separation. Here a facile and environment-friendly l-cysteine-assisted hydrothermal process under weakly alkaline conditions is demonstrated for the first time to fabricate ZnIn₂S₄/In(OH)₃ hollow microspheres with intimate contact, which are verified by XRD, SEM, (HR)TEM, XPS, N₂ adsorption-desorption, UV–Vis DRS and photoluminescence spectra. ZnIn₂S₄/In(OH)₃ heterostructure (L-cys/Zn²⁺ = 4, molar ratio) with a band-gap of 2.50 eV, demonstrates the best photocatalytic performance for water reduction and MB degradation under visible light, outperforming its counterparts (In(OH)₃ and ZnIn₂S₄). The excellent activity of ZnIn₂S₄/In(OH)₃ heterostructure arises from the intercrossed band-edge positions as well as the unique hollow structure with large surface area and wide pore-size distribution, which are beneficial for the efficient charge migration from bulk to surface as well as at the interface between ZnIn₂S₄ and In(OH)₃. This work provides an efficient and eco-friendly strategy for one-pot synthesis of heterostructured composites with intimate contact for photocatalytic application.     

A modified particle swarm optimization with multiple subpopulations for multimodal function optimization problems

In this paper, a modified particle swarm optimization (PSO) algorithm is developed for solving multimodal function optimization problems. The difference between the proposed method and the general PSO is to split up the original single population into several subpopulations according to the order of particles. The best particle within each subpopulation is recorded and then applied into the velocity updating formula to replace the original global best particle in the whole population. To update all particles in each subpopulation, the modified velocity formula is utilized. Based on the idea of multiple subpopulations, for the multimodal function optimization the several optima including the global and local solutions may probably be found by these best particles separately. To show the efficiency of the proposed method, two kinds of function optimizations are provided, including a single modal function optimization and a complex multimodal function optimization. Simulation results will demonstrate the convergence behavior of particles by the number of iterations, and the global and local system solutions are solved by these best particles of subpopulations.     

Enhanced thermal conductivity of PP hybrid films induced by filler orientation and laminated structure

Journal of Materials Science - Currently, polymeric composites with good thermal conductivity and simple preparation method are in the rapid increment of demand. In this work,...     

Highly active nitrogen-doped few-layer graphene/carbon nanotube composite electrocatalyst for oxygen reduction reaction in alkaline media

In this work the electrocatalysis of oxygen reduction on nitrogen-doped few-layer graphene/multi-walled carbon nanotube (FLG/MWCNT) composite catalyst has been investigated. These composite materials were prepared from different nitrogen precursors, acid-treated MWCNTs and graphene oxide (GO), which was synthesised from graphite by the modified Hummers’ method. Urea and dicyandiamide were used as nitrogen precursors and the doping was achieved by pyrolysing the mixture of GO and MWCNTs in the presence of these nitrogen-containing compounds at 800 °C. The N-doped composite catalyst samples were characterised by scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy, the latter method revealed successful nitrogen doping. The oxygen reduction reaction (ORR) was studied in 0.1 M KOH on glassy carbon electrodes modified with N-doped FLG/MWCNT electrocatalysts employing the rotating disk electrode (RDE) method. The RDE results indicated that these metal-free nitrogen-doped nanocarbon catalysts possess remarkable electrocatalytic activity towards the ORR in alkaline media similar to that of commercial Pt/C catalyst. The results obtained in this work are particularly important for the development of non-Pt cathode catalysts for alkaline membrane fuel cells.     

LDPE/SEBS复合材料化学交联及相关性能的研究

采用二段混炼的方法,制备低密度聚乙烯/苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(LDPE/SEBS)复合材料。探究SEBS的不同含量对LDPE/SEBS力学性能的影响。通过双叔丁基过氧异丙基苯(BIBP)化学交联LDPE/SEBS,制备LDPE/SEBS/BIBP复合材料,探究LDPE/SEBS/BIBP的力学性能、微观形貌、凝胶含量、热学性能和流变性能。结果表明:SEBS用量为50份时,LDPE/SEBS具有较好的力学性能。当BIBP用量为0.9份,LDPE/SEBS/BIBP的力学性能最佳,拉伸强度为26.22 MPa,断裂伸长率为732.23%。随着BIBP用量的增加,LDPE/SEBS/BIBP的界面相容性、凝胶含量和黏度上升,熔融温度、结晶度和损耗模量下降,储能模量曲线的斜率先下降后趋于稳定。     

High resolution transmission electron microscopy study on polyacrylonitrile/carbon nanotube based carbon fibers and the effect of structure development on the thermal and electrical conductivities

Polyacrylonitrile (PAN) and PAN/carbon nanotube (CNT) based carbon fibers at various CNT content have been processed and their structural development was investigated using high resolution transmission electron microscope (HR-TEM). In CNT containing carbon fibers, the CNTs act as templating agents for the graphitic carbon structure development in their vicinity at the carbonization temperature of 1450 °C, which is far below the graphitization temperature of PAN based carbon fiber (>2200 °C). The addition of 1 wt% CNT in the gel spun precursor fiber results in carbon fibers with a 68% higher thermal conductivity when compared to the control gel spun PAN based carbon fiber, and a 103% and 146% increase over commercially available IM7 and T300 carbon fibers, respectively. The electrical conductivity of the gel spun PAN/CNT based carbon fibers also showed improvement over the investigated commercially available carbon fibers. Increases in thermal and electrical conductivities are attributed to the formation of the highly ordered graphitic structure observed in the HR-TEM images. Direct observation of the graphitic structure, along with improved transport properties in the PAN/CNT based carbon fiber suggest new applications for these materials.     

The quantitative investigation of mechanical properties and characterization of fractured position for friction stir lap welded A6111/A5023

The effects of plunge depth (PD) revolutionary pitch (RP) and materials arrangement on deformation and softening material at the fractured position of a friction stir welded AA6111 to AA5023 lap joint were investigated. As a result, the main factor determining tensile shear load and fracture was different with the location of soft material. When the soft material was located on top, the softening material and the deformed surface height occurred by friction heat generation of the rotating shoulder. The main factor was the deformed surface height rather than the softening material, and the deformed surface height was decreased with increasing RP. On the other hand, when the soft material was located at the bottom, the movement of the un-bonded line and hooking occurred due to the vertical flow of the rotating probe. The crucial factor was the position of the un-bonded line rather than the height of the hook. The un-bonded line occurred along the interface between two materials affected by the lowest strength, which were deformed toward the hard material affected by a higher joint strength.